28 July, 2014 BY JIM HILL
When measuring for new kitchen cabinet doors or replacement cabinet doors, the type of hinge you intend to use will influence the door sizes.
If you intend to use your existing hinges simply measure your existing cabinet doors and order doors of the same sizes.
If you plan to use our Top-Quality, Blum Inserta, Clip-top hinges with 1/2-inch overlay, your hinges will ship with your order. To insure your new doors are perfectly sized for use with our hinges, the door size measurements are figured as follows:
On single doors simply measure the opening size and add 1-inch to both the width and height. For instance, if the cabinet opening size is 12-inches wide and 24-inches high, the door size will be 13 x 25.
On wider cabinets with two doors (butting in the center), measure the width of the opening, add 1-inch, then divide by 2.
Height is figured the same as for single doors. Just add 1-inch to the opening.
For instance, if the opening is 28 inches wide and 30 inches high, each door width would be 28 + 1 = 29 divided by 2 = 14 1/2-inches wide.
Our Blum hinges have plus/minus 2 millimeters of adjustment which will allow enough side adjustment to have a gap of up to 1/8-inch between the butting doors. If you live in a high humidity climate you may want to subtract an additional 1/16″ from the width of your Butt Doors.
So, don’t be intimidated into thinking it’s difficult to figure door sized from openings. Just take the measurements and order the door style of your choice…of give us a call and we’ll talk you through the entire process.