Mitered Glass Ready Cabinet Doors
Read our Customer Review page and see what others are saying about CabinetDoors.Com.
Mitered Glass-ready frames can be ordered in any wood and any size.
For a Glossary of common woodworking terms click here.
Glass Frames are cabinet doors without the panel in the center of the door. All cabinet doors can be made in a Glass Frame version, including all of our 5-piece drawer fronts.
When the frame components (the stiles and rails) are machined through a Moulder, the inside detail is given one of hundreds of available stile-cuts, and each of these stile-cuts consists of the stile pattern with a 1/4-inch groove where the door's panel will be installed. The placement of this groove is critical to the door's design and adjusts the face of the raised panel to be exactly flush with the face of the frame. The groove placement also sets the thickness of the flange at the back of the door. This rear flange is designed to securely hold the panel within a raised or inset-panel cabinet door.
This rear flange, which is about 3/16-inch thick is removed on all Glass Frames allowing the glass to be installed from the rear of the completed door.
Whether the Glass Frame is of Cope & Stick or Mitered design determines the method used to convert a standard cabinet door into a glass frame.
Cope & Stick doors have the back flange removed from the rails and the back flange removed from the stiles except where the rails join to the stiles. An example of the differences between a Cope & Stick cabinet door and a Cope & Stick Glass Frame can be seen in this picture.
The Glass Frame is shown at top and the stiles & rails for the panel door is shown below.
The design of Mitered Cabinet Doors makes the process of building a Mitered Glass Frame easier than with the traditional Cope & Stick process.
Because the components of the frames in mitered doors meet at a 45-degree angle, instead of the 90-degree angle in Cope & Stick doors, the flange that normally holds the panel can be completely removed from both stiles and rails. This simplifies the process for Mitered Glass Frames and allows for a perfectly square opening in the back of the Glass Frame for the glass to be installed.
An example of the differences between a Mitered cabinet door and a Mitered Glass Frame can be seen in this picture.
The Glass Frame is at top and the stiles & rails for the panel door is shown below.
Notice that on both the Cope & Stick and Mitered stiles and rails that the groove that accepts the panel is placed the
same dimensions from the face and back of the door. This spacing of 400-thousandths inches from the face is standard on every door or frame we produce and is constant on all Cope & Stick and Mitered Cabinet Door and Glass Frame.
Our investment in State-of-the-art, computerized manufacturing machinery allows us to make cabinet doors at a quality level, and a volume not possible from smaller manufacturers. Our high manufacturing volume also provides an economy of scale that allows us to offer superior quality cabinet doors at a cost significantly below other internet sources.
Follow these links to browse each of our Specialty Cabinet Door Categories.
We offer the Industry-Leading soft closing hinge from Blum. This is it! Click here...For more about our Hinges.
CabinetDoors.Com is proud to have an A+ BBB Rating
Your Youtube videos are outstanding. You made measuring and hanging my new doors a snap. Thank you. Jen A.
I ordered new cabinet doors for my upper cabinets in my kitchen. They needed to match the bottom doors. Thanks to your very knowledgeable staff, I got perfect doors--the grain matched, the trim matched, and the hardware is outstanding. I am delighted and would recommend this company without reservation. Thank you for an outstanding product. Madge S.
My order of cabinet doors was delivered today, and I could not be more pleased. They are BEAUTIFUL. Thank you so much for making a great product.Stacy K.
I'm a home re-modeling handyman and I just finished a kitchen remodel using your Shaker Doors. This was my first order from you and the sizes and overall quality are much better than my prior supplier. You helped my make my customer very happy.Mike B.
This was my 4th kitchen re-model with your cabinet doors and, just like before, the doors were perfect. The workmanship is top notch and the sanding was exceptional. My 5th kitchen job is scheduled for August and I'll be ordering from you again. You make a great door.Kent's Kitchens
We ordered replacement doors for our 60-year-old home and were very pleased with the product. The milling was of the highest quality. The joinery was very well done, and the wood selection was obviously done by a professional who cares what the finished product looks like. It is one thing to assemble a project with technical skill, and another thing entirely to accomplish the assembly with an eye toward bringing the best out of the wood being used. Both aspects were accomplished, and at a very high level! The dimensions were absolutely perfect. Each door was correctly dimensioned to within less than 1/16 of an inch. It was very pleasing to see this attention to detail, especially since I took the time to measure my cabinets twice, making sure I had done my part. I had never worked with white birch before, and when I saw the issues with staining the wood (soft grain with blotchy absorption of the stain) I was a bit worried. I had no problems at all because the wood was of a higher quality white birch that had been properly handled at the mill and sanded to a stain-ready finish. A good sanding sealer was applied, and then the stain. The results were EXCELLENT! All-in-all, we received a great product, great advice and excellent customer service from CabinetDoors.com. We would certainly recommend them to anyone looking for cabinet doors. Nice job, everyone! Michael R.
The doors arrived today and fit perfectly. Thank you very much. I will be ordering the remaining 18 doors and 6 drawer fronts in the next couple of months. Walter W.
I remodel kitchens for a living and I can only say...I wish I had found you sooner. These are the overall BEST cabinet Doors I have ever installed. Excellent quality and workmanship. Jake A.
Your cabinet doors are much higher quality than the doors that were installed by our home builder. There is really no comparison, you make a GREAT product. Al N.
The contractor remodeling our kitchen was so impressed with the doors we ordered from your website that he is going to use your doors for all his future jobs. Marcia N.
Your cabinet doors, and the finishing tips in your blog, made my kitchen remodel look GREAT. I recommend your doors to everyone. Kay H.
Hi, I have received my 1 door, and I feel like I received the same quality service and product as if it were 50 doors. I am very pleased with a beautiful door delivered as promised. Thanks, David H.
Although I haven't bought the cabinet doors for my kitchen remodeling project yet, I will be making my purchase from cabinetdoors.com. Your site, and especially your Blog, has more useful information than I've found anywhere else on the internet. The information you provide is exceptional and you have helped to give me the confidence to take-on this project. Nancie D.
We took your advice and ordered the smallest door in our kitchen to see your quality...which is absolutely great...Now we are ordering the rest of the kitchen and bath doors. Don & Barb B.
These cabinet doors are PERFECT! Super high quality and right-on size. Harry D.
So glad we remodeled our kitchen with your doors, instead of doors from the hardware chain. You saved us over 35%. The doors arrived in 12 days, (including 4 Fedex shipping days). The hardware chain quoted 28 days, and your quality is far better than their samples. Mark H.
These doors are EXCELLENT! In quality and workmanship and value. Very glad we found you. James L.
A friend put me onto your website and I can't thank her enough. You make an excellent product and I'm completely happy with everything about my purchase. Paula B.
I am very satisfied with these doors. The quality is GREAT!. Alex D.
Very nice cabinet doors, the color matching and the sizes are right-on. Paul L.
Your customer service is fantastic. Somehow you spotted an error I made on my order (I reversed width and height on one door) and called me to ask if the size was correct. Your attention to detail prevented me from ordering one of my doors wrong. Thank you so much. Bryan E.
Fedex or UPS Shipping time from our factory to you.
Our production time is 7-10 business days. Just add shipping to your state for your expected delivery date.
For shipping times to Mexico and Canada Please call.