Paint Cabinet Doors Like an expert:
How to finish Paint-Grade Cabinet Doors and get a finish you can be proud of.
So you just received your new Paint-Grade Cabinet Doors and are ready to start painting. Here are a few tips to get an attractive and durable finish on those new doors.
Don't stress-out about the painting process, even if you are an inexperienced painter.
Painted doors are not like stained doors where a disappointing stained finish can ruin your day. If you don't like your painted finish just scuff the doors a little by re-sanding and paint them again.
First, unpack the new doors and inspect them front and back for any scratches caused by shifting during shipping. Smooth these scratches with 180-grit sandpaper and brush off the dust with a fine brush. Sand in the direction of the wood grain to avoid making cross-grain scratches on your doors.
The better the prep-sanding the better the painted finish will be so take some time making sure the sanding is as good as you can make it.
Next, lay the cabinet doors flat and either wipe them with a clean cloth or blow them with compressed air to remove the last traces of dust. Laying the doors flat makes paint runs less likely and makes it easier to see your progress from the same angle.
Now the painting process starts. Raw wood needs a primer coat before painting and there are a few primer tips that will be helpful: Always match the primer to the type of paint you plan to use.
If you intend to use water-base (or Latex paint) then use a water base primer and if you are using an oil based paint then use an oil based primer.
In my experience Latex paints have advanced over the past decade to the point where they produce both appearance and dependability equal to their oil based counterparts, especially for indoor applications.
These advancements coupled with the water clean-up and environment-friendly disposal are worth considering when choosing your finishing materials.
While buying your primer and paint, also get a brush or two. You don't need to buy the $20 super brush, but don't get the $1 special either. A 2-3" fine brush should be about $5.
You may also want to buy a small 3-4" fine roller.
Now for the priming: Lay the doors out flat on some kind of dropcloth. Newspaper works fine for this. It will reduce your anxiety to start with the doors face down. That way you will be finishing the backs first so as you get better at painting your best work will be on the fronts, and your learning experience won't show.
Use the roller to apply a lite coat of primer to the panel and the inside detail of the stiles and rails. Now use the brush in those deep recesses to get the primer to cover all the machined surfaces. Use the roller again to coat the flat surfaces followed by the brush to give a smooth, even coating. After the primer is dried (follow the drying time instructions on the primer can) sand by hand gently with 220-grit paper, just enough to remove any fibers the primer raised, and to restore the smooth finish. Now turn the door over and repeat on the front.
After the primer is dry and lightly finish sanded, repeat the process with a second coat or primer.
Once the primer is dry you are ready for the paint.
The paint basically follows the same steps as the primer operation. Follow the instructions on your paint can to determine if you should sand between coats or not.
After the paint is dry you are ready to install the hinges.
If you are using hidden hinges, like our Blum Clip-tops, try not to get paint into the 30mm hinge cups. The hinges will be a snug fit into the cups and if you get paint into the holes you may need to sand it out to get the hinges into the cups.
Once you get started you'll see that the process is really not difficult at all, and you will be able to obtain results that will impress your family and friends.
So, get started and if you haven't ordered you new Paint Grade cabinet doors yet, now may be the time. Cabinetdoors.com has been manufacturing custom cabinet doors for 34 years and we've been offering doors on the internet longer than anyone else in the country. We have shipped hundreds of thousands of doors to every region and our customer reviews are a consistent 4+stars.
If you have any questions just visit our website at www.cabinetdoors.com, our Blog at www.cabinetdoors.com/blog, or call us. We will be happy to answer any questions you may have. We also have extensive posts, advice, and how-to's on our Facebook page and our Google+ page.
We offer the Industry-Leading soft closing hinge from Blum. This is it! Click here...For more about our Hinges.
CabinetDoors.Com is proud to have an A+ BBB Rating
Your Youtube videos are outstanding. You made measuring and hanging my new doors a snap. Thank you. Jen A.
I ordered new cabinet doors for my upper cabinets in my kitchen. They needed to match the bottom doors. Thanks to your very knowledgeable staff, I got perfect doors--the grain matched, the trim matched, and the hardware is outstanding. I am delighted and would recommend this company without reservation. Thank you for an outstanding product. Madge S.
My order of cabinet doors was delivered today, and I could not be more pleased. They are BEAUTIFUL. Thank you so much for making a great product.Stacy K.
I'm a home re-modeling handyman and I just finished a kitchen remodel using your Shaker Doors. This was my first order from you and the sizes and overall quality are much better than my prior supplier. You helped my make my customer very happy.Mike B.
This was my 4th kitchen re-model with your cabinet doors and, just like before, the doors were perfect. The workmanship is top notch and the sanding was exceptional. My 5th kitchen job is scheduled for August and I'll be ordering from you again. You make a great door.Kent's Kitchens
We ordered replacement doors for our 60-year-old home and were very pleased with the product. The milling was of the highest quality. The joinery was very well done, and the wood selection was obviously done by a professional who cares what the finished product looks like. It is one thing to assemble a project with technical skill, and another thing entirely to accomplish the assembly with an eye toward bringing the best out of the wood being used. Both aspects were accomplished, and at a very high level! The dimensions were absolutely perfect. Each door was correctly dimensioned to within less than 1/16 of an inch. It was very pleasing to see this attention to detail, especially since I took the time to measure my cabinets twice, making sure I had done my part. I had never worked with white birch before, and when I saw the issues with staining the wood (soft grain with blotchy absorption of the stain) I was a bit worried. I had no problems at all because the wood was of a higher quality white birch that had been properly handled at the mill and sanded to a stain-ready finish. A good sanding sealer was applied, and then the stain. The results were EXCELLENT! All-in-all, we received a great product, great advice and excellent customer service from CabinetDoors.com. We would certainly recommend them to anyone looking for cabinet doors. Nice job, everyone! Michael R.
The doors arrived today and fit perfectly. Thank you very much. I will be ordering the remaining 18 doors and 6 drawer fronts in the next couple of months. Walter W.
I remodel kitchens for a living and I can only say...I wish I had found you sooner. These are the overall BEST cabinet Doors I have ever installed. Excellent quality and workmanship. Jake A.
Your cabinet doors are much higher quality than the doors that were installed by our home builder. There is really no comparison, you make a GREAT product. Al N.
The contractor remodeling our kitchen was so impressed with the doors we ordered from your website that he is going to use your doors for all his future jobs. Marcia N.
Your cabinet doors, and the finishing tips in your blog, made my kitchen remodel look GREAT. I recommend your doors to everyone. Kay H.
Hi, I have received my 1 door, and I feel like I received the same quality service and product as if it were 50 doors. I am very pleased with a beautiful door delivered as promised. Thanks, David H.
Although I haven't bought the cabinet doors for my kitchen remodeling project yet, I will be making my purchase from cabinetdoors.com. Your site, and especially your Blog, has more useful information than I've found anywhere else on the internet. The information you provide is exceptional and you have helped to give me the confidence to take-on this project. Nancie D.
We took your advice and ordered the smallest door in our kitchen to see your quality...which is absolutely great...Now we are ordering the rest of the kitchen and bath doors. Don & Barb B.
These cabinet doors are PERFECT! Super high quality and right-on size. Harry D.
So glad we remodeled our kitchen with your doors, instead of doors from the hardware chain. You saved us over 35%. The doors arrived in 12 days, (including 4 Fedex shipping days). The hardware chain quoted 28 days, and your quality is far better than their samples. Mark H.
These doors are EXCELLENT! In quality and workmanship and value. Very glad we found you. James L.
A friend put me onto your website and I can't thank her enough. You make an excellent product and I'm completely happy with everything about my purchase. Paula B.
I am very satisfied with these doors. The quality is GREAT!. Alex D.
Very nice cabinet doors, the color matching and the sizes are right-on. Paul L.
Your customer service is fantastic. Somehow you spotted an error I made on my order (I reversed width and height on one door) and called me to ask if the size was correct. Your attention to detail prevented me from ordering one of my doors wrong. Thank you so much. Bryan E.
Fedex or UPS Shipping time from our factory to you.
Our production time is 7-10 business days. Just add shipping to your state for your expected delivery date.
For shipping times to Mexico and Canada Please call.