Auburn Drawer Front

Description
More Info
Reviews

Auburn Drawer Front Specs

Product ID 904 5PDF
Price calculated as Sq. Ft. price + $6.00 per drawer front
Minimum width 11” Maximum width 40”
Minimum height 6” Maximum height 20”
There is no warranty on drawer fronts over 33” wide or 10” tall
Stiles are 2 1/4" wide & Rails are 1 1/2” wide
Panel grain runs horizontal
Pictured in Select Maple with a natural clear finish and Paint-Grade painted High Reflective White

Our Auburn 5 Piece Drawer Front will be aesthetically representative of the Auburn door (there may be some slight variations depending on style of door).

Scroll down the page to view pictures of the Auburn family of doors and drawer fronts.

This drawer front is available in a variety of wood species. It can be ordered with "No Finish" or with a "Natural Clear Finish." If ordering paint-grade, you can choose unfinished or prefinished in several Sherwin Williams conversion varnish colors. Drawer fronts ordered as Paint-Grade, either unfinished or painted, will have paintable hardwood frames and MDF (Medium Density Fiberboard) panels.

Scroll down the page to view pictures of the Auburn family of doors and drawer fronts.

No reviews have been left. Be the first to leave a review!

If you want to leave a review, please respond to the review email we sent after your purchase. If you do not have the the review email but would like to leave a review for this item you purchased, please contact us, and we'll manually add it for you!

Write a Review

Select a Wood Type

All unfinished products typically ship in 12 business days (add 25-30 business days if ordering painted or finished product).

Please note - Pictures of paint colors shown may vary from on-screen representation. To confirm your color choice prior to purchase, please view a physical color chip or color card.

All unfinished products typically ship in 12 business days (add 25-30 business days if ordering painted or finished product).

Fill out the remaining information below

Width: *

Height: *

Please selet a wood type.

Please note:

You may round up your dimensions up to the nearest thousandths (third decimal):
0.0625 = 0.063
Dimensions must be in increments of 1/16 and no smaller than 1/16 (0.0625 or 0.063) inch. All dimensions must be in one of the following layouts:
1212 3/412.75
Fractions must be entered in their simplest forms:
1/4 instead of 4/162 1/8 instead of 1 18/16

A center rail will be added to doors built with a cope and stick joint 50” or taller. Doors built with a mitered joint will not have a center rail.

Please note: